With the CB-80 Amor NS Pro Kit, Wismec presents the direct successor of the popular CB-60 kit. The CB-80 is a mod from Wismec and the successor of the successful model CB-60 and was designed by Jake Barney. Like the CB-60, the CB-80 has an ergonomic chassis with a striking, sophisticated look and is available in a variety of bright colors. There is certainly somethin for everyone.
The handling is very easy and the menu very user-friendly. The mod provides space for an 80 watt chipset that works very precisely and can be used in the usual modes. The resistance range is from 0.05 to 3.5 ohms. With this wide restistance range DL and MTL vapers will get their money´s worth.
The mod is powered by a 18650 battery (not included), which can be conveniently be charged via the intergrated 2-amp micro USB port. The battery can be easily inserted from the bottom (we recommend charging via an external charger). The software can also be updated via the mico USB cable. Thanks to its diameter of 22 mm, this mod is virtually compatible with a lot of atomizers. The CB-80 has a 0.9-inch OLED display, which allows easy reading of all parameters such as set power, battery level and set mode.
The CB-80 mod is combined with the Armor NS Pro atomizer, which has a diameter of 22 mm and a filling volume of 2 ml. With its colorful design, it fits visually and stylishly perfectly to the CB-80. The two form an excellent, perfectly matched combination.
The revised and optimized Airflow of the Amor NS Pro will inspire MTL and DL vaper - the regulation is carried out conveniently via the Airflow-Control-Ring. The Amor NS Pro is filled cleanly and practically with the Slide-Topfill-System with generous liquid holes.
In the Amor NS Pro you can use the WS coils with a relatively high resistance between 1.3 ohms (WS04) and 1.5 ohms (WS03) - the high resistance making them ideal for MTL vapers. Due to this high resistance range, the coils require a lower wattage, which keeps the battery longer alive. But also DL vapers get their money´s worth with the 0.2 ohms (WS01) and the 0.25 ohms (WS02) coils with a perfect vape and taste development.
Features of the Wismec CB-80
- 80 watt chipset
- 0.9-inch OLED
- firing instantly at 25 milliseconds
Features of the Amor NS Pro
- Slide-Topfill-System
- 2.0 ml Tank capacity
- Coils of the WS-Series usable
- Airflow MTL and DL fit
Technical details for the Wismec CB-80
| Type | Electronically controlled |
| Diameter | 22 mm |
| Height | 80.4 mm |
| Width | 22.6 mm |
| Depth | 36.4 mm |
| Weight | 87.4 g |
| Thread | 510 made of stainless steel |
| Material | zinc-alloy |
| Loading facility | microUSB port, Passtrough capability |
| Output Power | 1 watt - 80 watt |
| Available modes | VW, TC (Ni,Ti,SS), TCR, Bypass |
| Output current | max. 50 A |
| Input voltage | 3.1 Volt 4.3 Volt |
| Output current | 0.5 Volt - 9 Volt |
| Compatible resistors | VW: 0.05 ohm - 3.5 ohm
TC: 0.05 Ohm - 1.5 Ohm |
| Temperature control | yes, 200 ° F - 600 ° F (with Celsius mode) |
| Display | 0.91-inch OLED |
| compatible batteries | 1x 18650 (high drain) - not included |
Technical Details for the Amor NS Pro
| Diameter | 22 mm |
| Length | 46.2 mm |
| Weight | 44.6 g |
| Capacity | 2.0 ml |
| Connection | 510er Gewinde |
| DripTip Connection | 510er |
| DripTip | 510er in Honeycomb look |
| AFC | via Airflow-Control-Ring |
| Filling | Slide-Topfill-System |
| Coils | Verdampferköpfe mit:
1,5 ohms
1.3 ohms
0.25 ohms
0.2 ohms |
| Material | stainless steel
pyrexglas |
Scope of Delivery
| 1x | CB-80 with Amor NS Pro - Kit |
| 1x | WS04 MTL Coil (1.3 ohms) |
| 1x | WS01 Triple Coil (0.2 ohms) |
| 1x | micro-USB cable |
| 1x | spare parts |
| 2x | user manual |
